Search results for: 'window grilles blanks fiat doblo 2010 onwards rear single tailgate 2'

• Designed to fit the Fiat Doblo 2010 to 2022 L1 Short Wheelbase Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Fiat Doblo 2010 to 2022 L2 Long Wheelbase Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

PLEASE ADVISE AT THE POINT OF ORDER IF YOU REQUIRE THE COVER IN BLACK OR GREY

Universal Drivers Seat Covers

Citroen Berlingo 2, 2008-2018 Single Driver Seat Covers

Driver’s Seat,

Our best selling Universal Fit Seat Cover with an elasticated apron around the front, integral headrest and Velcro fastenings to allow access for armrests.

KEY FEATURES

• Integral headrest
• Elasticated apron around base
• Covers back of the seat
• Velcro slot on both sides for armrests
• Access hole for seat adjuster
• Fits most seats
• Velcro underneath holds the cover in place

Dimensions:

Base Width 52cm / Base Depth 48cm / Back Height 81cm / Back Width 55cm

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• Rhino KammBar Rear Roller "NOT Rhino Delta Bars".
• Stainless steel roller
• Features adjustable anti-rattle composite connection
• Makes loading and unloading easier and safer.
• Roller length 656mm

• Designed to fit the Fiat Doblo 2022 onwards L2 long wheelbase - Twin Rear Door.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Fiat Doblo 2022 onwards L1 Short Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Fiat Doblo 2022 onwards L1 Short Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

A Tailored Fiat Doblo Driver or Passenger Seat Cover

This seat cover is designed to fit the single driver seat and passenger seat in the Fiat Doblo 2010 to 2022.

KEY FEATURES

• Easy to fit
• Velcro slots at the side of cover allow access to armrest and seat adjuster controls
• Separate headrest covers included
• Protects the back of the seat
• The base is held in place by our specially designed tuck-in system
  

In the box:
Three pieces: one single cover and one headrest

• Designed to fit the Fiat Scudo 2022 onwards L2 Long Wheelbase/H1 Low Roof Tailgate Rear Door Model. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Fiat Scudo 2022 onwards L2 Long Wheelbase/H1 Low Roof Tailgate Rear Door Model. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

A Tailored Fiat Doblo Driver Seat Cover

This seat cover is designed to fit the single driver seat in the Fiat Doblo 2022 Onwards

KEY FEATURES

• Easy to fit
• Heavy duty
• Waterproof
• Oil & mud resistant
• Overlocked stitching for ultra-strong seams
• Designed in the UK
• Allows for all seat functions

In the box:

Driver/Single Front Passenger

This product comes in three pieces:

• 1 x backrest cover
• 1 x base cover
• 1 x headrest cover

Box size (driver): 10x9x22cm

• Designed to fit the Fiat Scudo L1/H1, Tailgate Rear Door, 2022 Onwards. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Fiat Scudo L1/H1, Tailgate Rear Door, 2022 Onwards. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Rhino KammBar Rear Roller "NOT Rhino Delta Bars".
• Aluminium rear roller
• Features adjustable anti-rattle composite connection
• Makes loading and unloading easier and safer.
• Roller length 816mm

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Available as standard 335/300mm depth shelving.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Available as standard 335/300mm depth shelving.