Search results for: 'wheel trims 16 inch to fit boxer motor hot'

A set of 4 wheel trims for 16 inch wheels on Vans and Motorhomes with SINGLE rear wheels only.

Quickly and inexpensively enhance the look of your vehicle,

Stainless Steel /Chrome effect plated ABS deep dish wheel trims,

Van/Motorhome wheel trims are different to a car wheel trim, car trims will not fit a van.

To confirm your wheel size simple look at the tyre wall and it will have number eg 205/70-16 and the last two numbers will be the wheel size, please DON’T go out with a tape measure as wheels are not measured that way.

A set of 4 wheel trims for 15 inch wheels on Vans and Motorhomes with SINGLE rear wheels only.

Quickly and inexpensively enhance the look of your vehicle,

Stainless Steel /Chrome effect plated ABS deep dish wheel trims,

Van/Motorhome wheel trims are different to a car wheel trim, car trims will not fit a van.

To confirm your wheel size simple look at the tyre wall and it will have number eg 195/65-15 and the last two numbers will be the wheel size, please DON’T go out with a tape measure as wheels are not measured that way.

Peugeot Boxer Front Double Passenger Seat Cover

This cover is designed to fit the right hand drive double passenger seat in the Peugeot Boxer.

KEY FEATURES

• Velcro slots allow easy fitting
• Protects back of seat
• Allows access to integrated seatbelt
• Zipped opening flap allows access to the middle fold down tray

In the box: One full double passenger seat cover.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Supplied with 435/400mm & 335/300mm depth shelves on the O/S & 335/300mm & 235/200mm N/S.

Driver or Single Passenger Seat Cover for the Peugeot Boxer 2006 Onwards

This cover is designed to fit the driver or single passenger seat in the Peugeot Boxer 2006 Onwards

(For the double passenger seat please see our part no CP12)

KEY FEATURES

• Easy to fit
• Velcro slots provide access to the armrest and seat adjuster controls
• Protects the back of the seat
• The Base is held in place by our specially designed 'tuck-in' system

In the box:
One-piece seat cover

A 3 piece rubber floor mat for Peugeot Boxer 2014 Onwards

The 13mm edge prevents dirt from spilling over the edge and is made from a premium odourless material.

Easy to fit and comes with a two-year manufacturer guarantee.

KEY FEATURES

• Highly durable and resistant to dirt
• Easy to clean
• Interlocking design with grip

These covers are designed to fit the driver and passenger double seats in the Peugeot Boxer.

Driver Seat Cover,

KEY FEATURES

• Easy to fit
• Velcro slots provide access to armrest and seat adjuster controls
• Protects back of seat
• Base is held in place by our specially designed 'tuck-in' system

In the box: One single piece seat cover.

Passenger Double Seat Cover,

KEY FEATURES

• Velcro slots allow easy fitting
• Protects back of seat
• Allows access to integrated seatbelt
• Zipped opening flap allows access to the middle fold down tray

In the box: One full double passenger seat cover.

Please advise at the point of order the colour choice, Black Or Grey.

A universal seat cover for the driver or single passenger seat Peugeot Boxer 2006 Onwards

This Stretch Front Seat Cover is similar to the Universal Fit above (3DF) with the addition of integral lycra stretch panels so that it fits larger seats.

KEY FEATURES

• Stretch panels enable fitting to larger seats
• Integral headrest
• Elasticated apron around base
• Covers back of the seat
• Velcro slot on both sides for armrests
• Access hole for seat adjuster
• Velcro underneath holds the cover in place

• Protects the rear of the vehicle upon impact
• Twin rubber buffer shock absorber system
• Shock absorption of up to 60mm
• Unique pivoting bracket design absorbs corner impact
• Vehicle specific fitting brackets, fast and simple fit.
• SUITABLE FOR THE 2018 ONWARDS VEHICLES WITH FACTORY FITTED PARKING SENSORS

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Available as standard 335/300mm depth shelving or deeper 435/400mm shelves.

• Note: Delivery is currently 7-10 days
• The computer CAD image is the racking supplied, all other images are examples of this racking.
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.

Please advise at the point of order the colour choice, Black or Grey

Driver Single,

KEY FEATURES

• Stretch panels enable fitting to larger seats
• Integral headrest
• Elasticated apron around base
• Covers back of seat
• Velcro slot on both sides for armrests
• Access hole for seat adjuster
• Velcro underneath holds cover in place

• Note: Delivery is currently 7-10 days
• The computer CAD image is the racking supplied, all other images are examples of this racking.
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Mobile Workshop Modular Van Racking & Drawer System With Worktop

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Supplied with 435/400mm & 335/300mm depth shelves on the O/S & 335/300mm & 235/200mm N/S.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Supplied with 435/400mm & 335/300mm depth shelves on the O/S & 335/300mm & 235/200mm N/S.

• Designed to fit the Peugeot Boxer 2006 onwards L3 Long Wheelbase/H3 Extra High Roof Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Supplied with 435/400mm & 335/300mm depth shelves on the O/S & 335/300mm & 235/200mm N/S.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Supplied with 435/400mm & 335/300mm depth shelves on the O/S & 335/300mm & 235/200mm N/S.

• Designed to fit the Peugeot Boxer 2006 onwards L3 Long Wheelbase/H2 High Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Peugeot Boxer 2006 onwards L1 Short Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.