Search results for: 'volkswagen+caddy+maxi+2008+up+to+2010+long+wheel+base+l2+low+roof+h1+3+x+aluminium+volkswagen+caddy+maxi+van+roof+bars+vecta+bar'

• Designed to fit the Volkswagen Caddy Maxi 2010 to 2015 L2 Long Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Volkswagen Caddy Maxi 2010 to 2020 L2 Long Wheelbase Tailgate Rear Door Model. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

Fast Shipping, Direct from the Rhino Products.

The All-New Rhino KammBar Roof Bars - Tomorrow's Generation, Today.

Fits Volkswagen Caddy Maxi 2010 to 2015 L2 all models

4 x 1272mm Rhino KammBar Bars With LoadStops & All Required Fixings.

The most aerodynamic bar profile possible, inspired by Professor Wunibald Kamm - a pioneering aerodynamicist.

Fast fitting with preassembled legs, bespoke to every van model for fast & easy installation.

The strong steel legs are covered with aesthetic composite covers giving a modern and premium look.

• Designed to fit the Volkswagen Caddy Maxi Cargo L2 Long Wheelbase Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Volkswagen Caddy Maxi Cargo L2 Long Wheelbase Tailgate Rear Door Model. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Volkswagen Caddy Maxi Cargo L2 Long Wheelbase Twin Rear Door Model.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Designed to fit the Volkswagen Caddy Maxi Cargo L2 Long Wheelbase Tailgate Rear Door Model. NOTE: As with any tailgate vehicle there will be tailgate opening restictions when fitting this product.
• Rhino's New KammRack Black Aluminium Roof Rack.
• A combination of strength, aerodynamics and performance has created Europes leading commercial van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, with 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• NOTE: Rack dimensions L-2.6m x W-1.1m "Not suitable for 8*4 sheets, See Modular Rack"
• Combines strength, style with premium performance.
• Fast and easy assembly.
• Manufactured using highly robust aluminium alloy. 
• Excellent load carrying capacity.
• Aerodynamic nose cones, low wind noise and less drag.
• Full width stainless steel rear roller.
• Europe's leading commercial van roof rack.

• Designed to fit the Volkswagen Caddy 2010 to 2015 L1 Short Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Roof Rack Dimensions :2.4m long x 1.25m wide
• Will carry 8 x 4 sheets/boards
• Rubust and hard-wearing van roof storage system.
• Fast and easy assembly thanks to its modular sections.
• Full width front aerofoil that significantly reduces overall wind noise
• Full width stainless steel rear roller.
• Vehicle specific fittings supplied.
• Tools required, 10 & 13mm spanner & the included allen key.
• Note: Dispatch cut off time is 2.30pm on Modular Racks "Mon-Friday"

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

(Will NOT fit the Caddy or Caddy Maxi Kombi or Life Model)

This seat cover set is tailored for rear folding seats in the Volkswagen Caddy (3rd Gen Facelift, 2010 to 2020).

The cover accommodates for:

• Adjustable headrests
• ISO fix points
• Folding seats
• Individual seat removal

It is made to measure, waterproof and heavy duty. Made from 600 denier Polyester with a polyurethane backing to offer the best combination of comfort and durability.

The cover is secure, easy to fit and comes with a two-year manufacturer guarantee.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• Note: Delivery is currently 7-10 days
• The computer CAD image is the racking supplied, all other images are examples of this racking.
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• NOTE: Rack dimensions L-2.6m x W-1.1m "Not suitable for 8*4 sheets, See Modular Rack"
• Combines strength, style with premium performance.
• Fast and easy assembly.
• Manufactured using highly robust aluminium alloy. 
• Excellent load carrying capacity.
• Aerodynamic nose cones, low wind noise and less drag.
• Full width stainless steel rear roller.
• Europe's leading commercial van roof rack.

• Designed to fit the Volkswagen Caddy 2015 to 2020 L1 Short Wheelbase/H1 Low Roof Twin Rear Door Model.
• Rhino's Aluminium KammRack.
• A combination of strength, aerodynamics and performance has created Europes leading commercials van roof rack.
• Rhino's quickest ever assemble & fitting roof rack, a one person assemble & installation.
• Comes with pre-assembled KammBar legs, 2 fitters this is assembled in approx 15 minutes.
• Features ultra-aerodynamic ‘Kamm’ bar profile cross bars.
• Full width strong anodised aluminium rear roller.

• Note: Delivery is currently 7-10 days
• 2.0mm Powder coated steel end frames and 0.9mm Galvanised steel adjustable shelves.
• Heavy Duty - High Quality - Real commercial van racking at its best.
• Welded end frames - Strength where it matters.
• Available as standard 335/300mm depth shelving or deeper 435/400mm shelves.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.

• High-tensile alloyed steel construction - when real strength is needed.
• Extremely aerodynamic - reduced drag and wind noise.
• Fast fitting with preassembled legs - vehicle specific - all fixings supplied.
• Durable and built to last - rigorously tested.